Facebook
Categories
Categories

acrylic foam tape

High performance double-sided pressure-sensitive adhesive belonging to the closed cell acrylic foam integrated structure. The foam itself is the base material of the adhesive layer, not foam+additional coating. It is commonly used to replace screws, rivets, and welding for structural bonding
Nov 16th,2026 1 Views

✅ Core Features

  • Viscoelasticity: can cushion vibration, absorb stress, and compensate for the difference in thermal expansion and contraction between two materials
  • Weather resistance: UV resistant, waterproof and moisture-proof, high and low temperature resistant, with a conventional range of -40 ℃ to 120 ℃, and high-end models can reach up to 150 ℃ in a short time, suitable for outdoor use
  • Sealing: Closed cell structure, combining adhesion and dust-proof and waterproof sealing
  • Compliant: able to adhere to slightly uneven surfaces; Gray is the most common, but there are also transparent and black options available
  • Compared to EVA/PU foam adhesive: it has much stronger aging resistance, temperature resistance, and shear strength, and belongs to the structural adhesive level, not ordinary decorative double-sided adhesive

📏 Common thickness specifications

0.4mm、0.6mm、0.8mm、1.0mm、1.2mm、1.6mm、2.0mm、3.0mm

  • Thin version (0.4-0.8mm): nameplate, identification, small accessories, electronic panel
  • Conventional (1.0-1.6mm): Automotive decorative strips, energy storage cabinet decorative panels, signs, aluminum-plastic panels
  • Thick version (2.0mm+): Large clearance and high shock absorption requirements in certain positions

🛠️ Mainstream applications

  1. Car: logo, wheel arches, rain shield, chrome trim, exterior fixing (most famous in 3M VHB series)
  2. New energy/energy storage cabinet: decorative panel, nameplate, PC/ABS decorative panel, module cover plate, external identification bonding, buffer sealing
  3. Appliances&Elevators: Control Panel, Decorative Component Fixing
  4. Advertising signage: installation of signboards, aluminum-plastic panels, glass, and metal signs
  5. Electronics: Fixed display module and camera components

⚠️ Key points of use (very important)

  1. The bonding surface must be clean, dry, oil-free, and free of release agent. It is recommended to wipe with isopropanol
  2. Roll press and apply pressure after bonding, and reach the final strength at room temperature for 24 hours; The adhesive strength increases slowly in low-temperature environments
  3. Not suitable for: low surface energy materials such as silicone rubber, PTFE, and PTFE (some LSE specific models can adhere to TPU/PP)
  4. Most of them belong to the permanent adhesive type, and most strong styles are prone to leaving residue and damaging the paint surface when torn off 

    Foshan Zhiwei Adhesive Products Co., Ltd. has over 20 years of professional matching solution experience in the double-sided adhesive industry. We welcome inquiries from major manufacturers and contact email:yang@fszw-tapes.com。

Previous